Des Champs Technologies / Munters
Des Champs/Munters stand-alone heat exchangers function independently of other equipment - allowing you to realize cost savings from waste gas streams. For more information contact us. (770) 345-4245. Munters offers (2) different types of industrial heat recovery systems. The Thermo-T™ and the Thermo-Z™. The Thermo-T™ tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. The Thermo-Z™ plate-style heat-exchanger is designed to recover heat from energy consuming processes up to
1500°F.
1500°F.
Thermo-T™
Thermo-T™ Brochure (PDF)
The Thermo-T™ tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-T™ offers fully adjustable tube-size and tube-spacing as well as both single-pass and multi-pass models.
Thermo-T™ Brochure (PDF)
The Thermo-T™ tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-T™ offers fully adjustable tube-size and tube-spacing as well as both single-pass and multi-pass models.
The Thermo-T™ heat-exchanger is designed for an industrial environment. High quality materials and construction provide superior performance in high-temperature or corrosive environments. The tubes are mechanically expanded into and then fully welded to the tube sheet. This provides a double layer of protection to ensure against cross-contamination.
The inner casing is constructed of the same material as the heat-transfer matrix. It is welded to the matrix at certain peripheral locations to assure an air-tight seal. At high temperatures, Thermo-T's integral expansion joints allow the tube/sheet assembly to expand without causing excessive stress. The internal casing is secured to the cold outer casing by means of integral thermal expansion joints. These joints allow the inner matrix/casing assembly to move about freely.
Finally, a layer of high-temperature insulation keeps the outer casing cool to prevent expansion as a result of process temperature changes.
Advantages:
• All welded construction
• Integral thermal expansion joints
• Up to 80% efficient with multi-pass design
• 4” - 8” double-wall insulated casing
• Insulated tube sheets
• Factory tested for .01% max leakage rate
• Various airflow configurations
Thermo-Z™
Thermo-Z™ Brochure (PDF)
• Integral thermal expansion joints
• Up to 80% efficient with multi-pass design
• 4” - 8” double-wall insulated casing
• Insulated tube sheets
• Factory tested for .01% max leakage rate
• Various airflow configurations
Thermo-Z™
Thermo-Z™ Brochure (PDF)
The Thermo-Z™ plate-style heat-exchanger is designed to recover heat from energy consuming processes up to 1500°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating.
Thermo-Z™ offers fully adjustable plate-thickness and plate-spacing and multiple flow patterns. The Thermo-Z™ heat-exchanger is designed for industrial environments. High quality materials and construction provide superior performance in high-temperature or corrosive environments.
The heat-transfer plates are completely seam-welded to ensure against cross-contamination. Plate spacing is achieved via raised and depressed, truncated, conical dimples that provide uniform plate pitch.
The inner casing is constructed of the same material as the heat-transfer matrix and is welded to the matrix at certain peripheral locations to assure an air-tight seal.
Advantages:
• Fully welded construction
• Up to 85% efficient
• 4” - 8” double-wall insulated casing
• .01% max leakage
• Various airflow configurations
• Variable plate spacing on heat exchanger
matrix plates
• Up to 85% efficient
• 4” - 8” double-wall insulated casing
• .01% max leakage
• Various airflow configurations
• Variable plate spacing on heat exchanger
matrix plates
Contact us for more information on the above products:
Email: sales@southgatepe.com
Phone: (770) 345-4245
Email: sales@southgatepe.com
Phone: (770) 345-4245